Arcadia Central Station LAN Configuration Rules
| Note: | Do not plug any two LAN ports into the same LAN or VLAN. This can create a network loop affecting IP stability. |
| Note: | Configuring/changing the AES67 IP address will cause the Arcadia Station to reboot. |
AES67 Rules
-
AES67 should not be on the same subnet as Management unless they are on the same LAN port (rear port)
-
AES67 cannot be on the same LAN port as DANTE primary or secondary
IP Rules
-
The IP addresses cannot be in the reserved range: 10.0.0.0-10.0.0.7
-
The subnet mask may cause an overlap with the reserved range
-
-
The IP addresses cannot be in the LQ tunnel range 172.23.xxx.xxx
-
The IP addresses cannot be in the localhost range 127.xxx.xxx.xxx
-
The IP addresses cannot be in the multicast range 224.xxx.xxx.xxx-239.xxx.xxx.xxx
Static IP Rules
-
The static IP addresses cannot be in link local range: 169.254.xxx.xxx
Dante Rules
-
Dante primary and secondary cannot be on the same LAN port (rear connector)
Management Rules
-
You cannot disable the Management LAN.